| |

iFix 爱修网

 Forgot password?
 Register

QQ登录

只需一步,快速开始

点此进入购买链接。
iFix爱修网知识星球,等待你的加入。。。
View: 1238|Reply: 7

大师们帮忙看看这条打印信息哪里有问题 长虹3DTV55860I

[Copy link]
Post time: 2019-4-15 11:57:18
| Show all posts |Read mode
008:  C:\Users\Administrator\Desktop\Print.log
009:  COM4, BaudRate:115200 bps, RXD: VGA->12,TXD: VGA->15,
UART_115200
BIST0-OK
BIST1-OK
[123456789A][123456789A]-55
[123456789A][0123456789]-54
_nPD
U-Boot 1.1.6CL302471 (Mar  9 2011 - 06:50:36)
Board: MSTAR TITANIA WDT (CPU Speed 504 MHz)
DRAM:  0x8000000
Skipping flash_init
Module: KEYPAD USB FAT NAND UBI UBIFS NET SPI STANDBY JFFS2 LOGO URSA
NAND:  nand_bbt: searching bbt....Bad block table found at page 131008, version 0x01
nand_bbt: searching bbt.....Bad block table found at page 130944, version 0x01
256 MiB
In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
MSVC00B000100100208768TH0000000T 
Set MIU0 group priority:c9.....
Set MIU1 group priority:c9.....
Change MIU0 select.....
Group0:d80   Group1:88    Group2:200   Group3:f1   
Change MIU1 select.....
Group0:4200  Group1:e00   Group2:30    Group3:4000  
Set MIU0 group priority:c9.....
Set MIU1 group priority:c9.....
Change MIU0 select.....
Group0:d80   Group1:f8    Group2:200   Group3:f1   
Change MIU1 select.....
Group0:4200  Group1:e00   Group2:30    Group3:4000  
0x00000000-0x0fa00000 : "mtd=0"
UBIFS: recovery needed
UBIFS: recovery deferred
UBIFS: mounted UBI device 0, volume 6, name "FACTORY"
UBIFS: mounted read-only
UBIFS: file system size:   2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
UBIFS: journal size:       1142785 bytes (1116 KiB, 1 MiB, 8 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: LZO
UBIFS: reserved for root:  0 bytes (0 KiB)
Load 'misc.ini' to 0x80400000 ,size 5748 (0x00001674)...OK
Load 'au_d.bin' to 0xa0a01000 ,size 61013 (0x0000ee55)...OK
Load 'au_s.bin' to 0xa0ad1000 ,size 17117 (0x000042dd)...OK
Load 'logo.mp3' to 0xa0c01000 ,size 20524 (0x0000502c)...OK
Load 'logo.jpg' to 0xa0c21000 ,size 183450 (0x0002cc9a)...UBI error: ubi_io_read: error -74 while reading 4144
bytes from PEB 502:118792, read %zd bytes
UBIFS error (pid 0): try_read_node: cannot read node type 1 from LEB 10:114696, error -74
UBI error: ubi_io_read: error -74 while reading 4144 bytes from PEB 502:118792, read %zd bytes
UBI error: ubi_io_read: error -74 while reading 4144 bytes from PEB 502:122936, read %zd bytes
UBIFS error (pid 0): ubifs_check_node: bad CRC: calculated 0xfff58613, read 0x4e5aea6d
UBIFS error (pid 0): ubifs_check_node: bad node at LEB 10:118840
UBIFS error (pid 0): ubifs_read_node: expected node type 1
UBIFS error (pid 0): do_readpage: cannot read page 16 of inode 69, error -117
Err
Load 'system.cfg' to 0x80400000 ,size 20252 (0x00004f1c)...OK
Load 'misc.ini' to 0x80400000 ,size 5748 (0x00001674)...OK
6m30 installed
=======test=========
=========enter
MDrv_Ursa_6M30_Power_MODE()=============
=========enter MDrv_Ursa_6M30_Power_MODE() really=============
>>CMD:93,8,1,0,0,0,0
MDrv_Ursa_6M30_3D_Cmd write data success.....
POWER mode ok!!!
JPD E_JPEG_WAITDONE out
UART_115200
BIST0-OK
BIST1-OK
[123456789A][123456789A]-55
[123456789A][0123456789]-54
_nPD
U-Boot 1.1.6CL302471 (Mar  9 2011 - 06:50:36)
Board: MSTAR TITANIA WDT (CPU Speed 504 MHz)
DRAM:  0x8000000
Skipping flash_init
Module: KEYPAD USB FAT NAND UBI UBIFS NET SPI STANDBY JFFS2 LOGO URSA
NAND:  nand_bbt: searching bbt....Bad block table found at page 131008, version 0x01
nand_bbt: searching bbt.....Bad block table found at page 130944, version 0x01
256 MiB
In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
MSVC00B000100100208768TH0000000T 
Set MIU0 group priority:c9.....
Set MIU1 group priority:c9.....
Change MIU0 select.....
Group0:d80   Group1:88    Group2:200   Group3:f1   
Change MIU1 select.....
Group0:4200  Group1:e00   Group2:30    Group3:4000  
Set MIU0 group priority:c9.....
Set MIU1 group priority:c9.....
Change MIU0 select.....
Group0:d80   Group1:f8    Group2:200   Group3:f1   
Change MIU1 select.....
Group0:4200  Group1:e00   Group2:30    Group3:4000  
0x00000000-0x0fa00000 : "mtd=0"
UBIFS: recovery needed
UBIFS: recovery deferred
UBIFS: mounted UBI device 0, volume 6, name "FACTORY"
UBIFS: mounted read-only
UBIFS: file system size:   2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
UBIFS: journal size:       1142785 bytes (1116 KiB, 1 MiB, 8 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: LZO
UBIFS: reserved for root:  0 bytes (0 KiB)
Load 'misc.ini' to 0x80400000 ,size 5748 (0x00001674)...OK
Wait for PM51 standby...........PM51 run ok...........==== Enter Standby Mode !! ====
Reply

Use magic Report

Post time: 2019-4-15 14:10:35
| Show all posts
待机状态,该进行开机了
Reply Support Not support

Use magic Report

Post time: 2019-4-15 14:48:23
| Show all posts
是的,待机状态,开机就可以了
Reply Support Not support

Use magic Report

 Author| Post time: 2019-4-15 16:11:07
| Show all posts
技术支持007 2019-4-15 14:10
待机状态,该进行开机了

就是不开机指示灯闪
Reply Support Not support

Use magic Report

Post time: 2020-3-15 20:19:24
| Show all posts
睡眠了,不知道我说得对不?
Reply Support Not support

Use magic Report

Post time: 2020-10-27 23:37:41
| Show all posts
 Enter Standby Mode !!
进入待机模式!
Reply Support Not support

Use magic Report

Post time: 2020-11-15 14:35:51
| Show all posts

008:C:\ Users \ Administrator \ Desktop \ Print.log
009:COM4,BaudRate:115200 bps,RXD:VGA-> 12,TXD:VGA-> 15,
UART_115200
BIST0-OK
BIST1-OK
[123456789A] [123456789A] -55
[123456789A] [0123456789] -54
_nPD
U引导1.1.6CL302471(2011年3月9日-06
:50: 36)板卡:MSTAR TITANIA WDT(CPU速度504 MHz)
DRAM:0x8000000
跳过flash_init
模块:KEYPAD USB FAT NAND UBI UBIFS NET SPI STANDBY JFFS2 LOGO URSA
NAND:nand_bbt:搜索bbt .... 0x01版的
坏块表nand_bbt:搜索bbt ..... 130130版0x01版的坏的块表
256 MiB
In :串行
输出:串行
错误:串行
网络:未找到以太网。
MSVC00B000100100208768TH0000000T??
设置MIU0组优先级:c9 .....
设置MIU1组优先级:c9 .....
更改MIU0选择.....
Group0:d80 Group1:88 Group2:200 Group3:f1   
更改MIU1选择.....
Group0:4200 Group1:e00 Group2:30 Group3:4000  
设置MIU0组优先级:c9 .....
设置MIU1组优先级:c9 .....
更改MIU0选择.....
Group0:d80 Group1:f8 Group2: 200 Group3:f1   
更改MIU1选择.....
Group0:4200 Group1:e00 Group2:30 Group3:4000   
0x00000000-0x0fa00000:“ mtd = 0”
UBIFS:需要恢复
UBIFS:推迟恢复
UBIFS:已安装的UBI设备0,卷6,名称为“ FACTORY”
UBIFS:已安装的只读
UBIFS:文件系统大小:2031616字节(1984 KiB,1 MiB,16 LEB)
UBIFS:日志大小:1142785字节(1116 KiB,1 MiB,8个LEB)
UBIFS:媒体格式:w4 / r0(最新为w4 / r0)
UBIFS:默认压缩器:LZO
UBIFS:为root保留:0字节(0 KiB)将
'misc.ini'加载到0x80400000,大小5748( 0x00001674)... OK将
'au_d.bin'加载到0xa0a01000,大小61013(0x0000ee55)... OK将
'au_s.bin'加载到0xa0ad1000,大小17117(0x000042dd)... OK将
'logo.mp3'加载到0xa0c01000 ,大小20524(0x0000502c)...确定将
'logo.jpg'加载到0xa0c21000,大小183450(0x0002cc9a)... UBI错误:ubi_io_read:读取4144时出现-74错误
从PEB 502:118792读取的字节数,%zd字节
UBIFS错误(pid 0):try_read_node:无法从LEB 10:114696读取节点类型1,错误-74
UBI错误:ubi_io_read:错误-74,同时从PEB 502读取4144字节: 118792,读取%zd字节
UBI错误:ubi_io_read:错误-74,同时从PEB 502:122936读取4144字节,读取%zd字节
UBIFS错误(pid 0):ubifs_check_node:错误CRC:计算得出的0xfff58613,读取0x4e5aea6d
UBIFS错误(pid 0 ):ubifs_check_node:LEB 10:118840处的
错误节点UBIFS错误(pid 0):ubifs_read_node:预期的节点类型1
UBIFS错误(pid 0):do_readpage:无法读取inode 69的第16页,错误-117
Err
Load'system.cfg '到0x80400000,大小20252(0x00004f1c)...确定
加载'misc.ini'到0x80400000,大小5748(0x00001674)...确定
已安装 6m30 ========
测试
================输入
MDrv_Ursa_6M30_Power_MODE() ======================
输入MDrv_Ursa_6M30_Power_MODE()实际上==============
>> CMD:93,8,1, 0,0,0,0
MDrv_Ursa_6M30_3D_Cmd写入数据成功.....
电源模式正常!!!
JPD E_JPEG_WAITDONE输出
UART_115200
BIST0-OK
BIST1-OK
[123456789A] [123456789A] -55
[123456789A] [0123456789] -54
_nPD
U-Boot 1.1.6CL302471(2011年3月9日-06
:50: 36)开发板:MSTAR TITANIA WDT( CPU速度504 MHz)
DRAM:0x8000000
跳过flash_init
模块:KEYPAD USB FAT NAND UBI UBIFS NET SPI STANDBY JFFS2 LOGO URSA
NAND:nand_bbt:搜索bbt ....第0x01版发现了坏块表
nand_bbt:搜索bbt .....在130944页中发现了坏块表,版本0x01
256 MiB
输入:串行
输出:串行
错误:串行
网络:未找到以太网。
MSVC00B000100100208768TH0000000T??
设置MIU0组优先级:c9 .....
设置MIU1组优先级:c9 .....
更改MIU0选择.....
Group0:d80 Group1:88 Group2:200 Group3:f1   
更改MIU1选择.....
Group0:4200 Group1:e00 Group2:30 Group3:4000  
设置MIU0组优先级:c9 .....
设置MIU1组优先级:c9 .....
更改MIU0选择.....
Group0:d80 Group1:f8 Group2:200 Group3:f1   
更改MIU1选择.....
Group0:4200 Group1:e00 Group2:30 Group3:4000   
0x00000000-0x0fa00000:“ mtd = 0”
UBIFS :需要恢复的
UBIFS:恢复延迟的
UBIFS:已安装UBI设备0,卷6,名称为“ FACTORY”
UBIFS:已安装只读
UBIFS:文件系统大小:2031616字节(1984 KiB,1 MiB,16 LEB)
UBIFS:日志大小: 1142785字节(1116 KiB,1 MiB,8个LEB)
UBIFS:媒体格式:w4 / r0(最新为w4 / r0)
UBIFS:默认压缩器:LZO
UBIFS:为根保留:0字节(0 KiB)
加载'misc.ini '至0x80400000,大小5748(0x00001674)...确定
等待PM51待机......... PM51运行正常........... ====进入待机模式!! ====
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register

Points Rules

QQ|||iFix 爱修网 ( 京ICP备12043912号 京公网安备11010802011648号 )

2020-12-1 18:55 GMT+8 , Processed in 0.088718 sec., 9 queries .

Powered by Discuz! X3.4

Release 20191201, © 2001-2020 Comsenz Inc.

MultiLingual version, Rev. 850, © 2009-2020 codersclub.org

Quick Reply To Top Return to the list